top of page
TEXAS · MOBILE ON-SITE WRAPPING

INDUSTRIAL SHRINK WRAP SERVICES IN TEXAS

Mobile equipment protection for oilfield and refinery equipment, data center equipment and other industrial assets in Texas during storage, transportation and project delays.

Industrial shrink wrap in Texas protects machinery, HVAC units, switchgear and refinery equipment from heat, UV, rain, dust and pests. Shrink Mobile crews come to your site, assess each asset, wrap it drum-tight on all six sides and inspect the result. Request a 24-hour proposal.

Large industrial chiller unit sealed in white shrink wrap at an outdoor Texas industrial facility

SERVICE

Mobile, on-site wrapping

COVERAGE

Texas

WRAP

Drum-tight, six-sided

ASSETS

Machinery, HVAC, freight, rail cars

PROCESS

Assess, wrap, inspect, remove

PROPOSAL

24-hour 
HOW WE WRAP

INDUSTRIAL SHRINK WRAP IN TEXAS: WRAPPED ON SITE BY MOBILE CREWS

Industrial shrink wrap is a film that tightens around a machine when heat is applied. It follows every edge, flange and fan guard. Nothing flaps, pools water or lets grit sift in.

​

Our industrial shrink wrap Texas crews come to the plant, yard, port or job site. A compressor skid or a chiller never has to move first. Typical jobs for industrial equipment shrink wrapping Texas wide include pumps, switchgear and process equipment that will sit outside before they run. See commercial equipment wrapping for the service page.

HEAVY MACHINERY SHRINK WRAP TEXAS: HOW THE CREW WORKS

Drum-tight is the standard. Film that sags has failed. Texas weather also changes what a wrap must handle; read the Texas weather and site risks.

industrial-shrink-wrap-installation-texas.png

01

ASSESS

The crew walks the equipment and marks weak points: coils, vents, controls and lifting points.​

02

WRAP

The crew frames the unit where needed and applies film on six sides, including the underside where access allows.​

03

INSPECT

The crew checks seams, tension and openings before leaving.

04

REMOVE

When the equipment is ready to ship or start up, the wrap is cut away.

WHAT WE PROTECT

WHAT WE PROTECT IN TEXAS

Five service lines cover most Texas industrial wrapping jobs. Pick the one closest to your equipment.

Two large rooftop HVAC units fully enclosed in tight white shrink wrap on a commercial building in Dallas, Texas

HVAC EQUIPMENT SHRINK WRAP TEXAS

Rooftop units, chillers and condensers can sit in heat and dust before startup. Fitted wrap keeps coils, fans and controls clean through delivery delays and staging.

HVAC WRAPPING DETAILS
Ultra-Tight Industrial Equipment Shrink Wrap – Coastal Texas Storm.png

OUTDOOR EQUIPMENT PROTECTION TEXAS

When a storm threatens or a site must reopen fast, crews can wrap exposed equipment on site. Fitted wrap sheds rain and keeps debris out.

DISASTER RELIEF WRAPPING
Large industrial machinery secured with white shrink wrap on a flatbed truck at the Port of Houston, Texas

FREIGHT SHRINK WRAPPING TEXAS

Crated and uncrated loads face rain, road grit and handling on long Texas hauls. Tight wrap keeps cargo sealed from the dock to the destination.

PLAN FREIGHT SHRINK WRAPPING
Large industrial equipment on a railroad flatcar in Texas, fully covered with ultra-tight white shrink wrap and secured for transport.

RAIL CAR SHRINK WRAP IN TEXAS

Rail cars and rail freight cross Texas through heat, dust and weather. Wrap seals loads and openings against moisture and contamination between loading and delivery.

EXPLORE RAIL CAR WRAPPING
Photorealistic square photo of a large piece of industrial equipment on a coastal Texas industrial site, completely encased in ultra-tight white shrink wrap film, smooth and taut with no wrinkles, standing outdoors under a dramatic approaching storm sky with dark clouds. Flat Gulf Coast landscape, coastal grass, soft storm light, wet concrete ground. Commercial industrial photography, sharp focus, 1:1 aspect ratio, high resolution.

INDUSTRIAL EQUIPMENT STORAGE PROTECTION TEXAS

Generators, pumps and process equipment often wait in laydown yards or on pads. Wrap protects them from dirt, moisture and pests while they wait.

REVIEW COMMERCIAL WRAPPING
industrial-shrink-wrapped-load-heavy-haul-trailer.png

skid-mounted equipment

compressors

pumps and process equipment

switchgear

electrical enclosures

generators

WEATHER AND SITE RISKS

TEXAS WEATHER AND SITE RISKS FOR INDUSTRIAL EQUIPMENT

Texas is not one climate. A pump on the Gulf Coast faces moisture and salt air. A pump in the Permian faces sand, wind and heat. Here is how the year plays out for equipment stored or staged outside.

SPRING

wave.png

Hail, severe storms, blown dust

wind.png

WHAT IT DOES

Dents fins, pits housings, drives grit into bearings and fans.

wind.png

HOW WRAP HELPS

Adds a barrier against small impacts and blown grit. It is not a shield against large hail.

SUMMER

sun.png

Hail, severe storms, blown dust

wind.png

WHAT IT DOES

Bakes paint, cracks cable jackets, ages seals and gaskets.

wind.png

HOW WRAP HELPS

Cuts direct sun on exposed surfaces and keeps dust off hot components.

FALL

rain (2).png

Hurricane rain and wind-driven moisture

wind.png

WHAT IT DOES

Soaks controls and enclosures, starts corrosion.

wind.png

HOW WRAP HELPS

Sealed wrap sheds rain and keeps water out of coils and panels.

WINTER

snow.png

Cold fronts, sleet and damp

wind.png

WHAT IT DOES

Causes condensation, water in crevices and ice damage.

wind.png

HOW WRAP HELPS

Keeps rain and sleet off the unit.

GULF COAST

Houston and Corpus Christi: humidity, salt air and hurricane rain drive corrosion.

EAST TEXAS

Longview area: wet weather and humidity reach controls and enclosures.

NORTH TEXAS

Dallas-Fort Worth: hail and strong storms.

PERMIAN AND WEST TEXAS

Dust, wind and heat dominate.

Plan storm-season wrapping before hurricane season, and see Houston industrial wrapping for Gulf Coast jobs.

REAL DAMAGE

DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE

Open-air equipment collects problems fast. Each one below ends in a repair bill or a late startup.

lighting.png

Debris from storms and construction catches in fan guards and scratches housings.

waterdrop (2).png

Moisture corrodes terminals, soaks insulation and fogs electronics.

sunny.png

UV breaks down paint, cable jackets and gaskets.

paw.png

Rodents and birds nest in enclosures and chew wiring. Droppings corrode and contaminate.

fog.png

Dirt and dust pack into coils, clog fans and score bearings. A compressor skid in a Permian laydown yard collects blowing sand. Wrap closes that path.

alert.png

Equipment damage shows up as bent coils, seized fans, failed controls, worn bearings and dead electronics. Switchgear and electrical enclosures are the most sensitive to moisture and contamination.

DAMAGE TYPE

LOOSE OR TORN TARP

DRUM-TIGHT SHRINK WRAP

Fit

Hangs loose, flaps and tears

Shrinks tight to the equipment

Water

Pools and funnels water into gaps

Sheds water, sealed seams

Pests

Open edges let birds and rodents in

No open edges to enter

Wind

Snaps, loosens and scuffs paint

Holds its shape in wind

Airflow

Traps damp air with no plan

Vented where the unit needs it

EQUIPMENT JOURNEY

PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY

Equipment is exposed from the factory floor to the installed system. Each step has its own risk and its own wrap approach. OEM equipment protection in Ohio is covered on our OEM & Factory Shrink Wrap Programs page.

01
MANUFACTURE

Risk: scuffs and dust during factory staging.

 

Wrap: factory wrap applied after final test so units leave clean.

02
PROTECT

Risk: yard and warehouse exposure to moisture, dust, birds and rodents.

 

Wrap: drum-tight, six-sided wrap over coils, controls and openings.

03
TRANSPORT

Risk: road grit, rain and wind during freight transportation.

 

Wrap: tight film that holds over highway miles, checked before departure.

04
STAGE

Risk: heat, storms and dust in laydown yards and construction staging when installation is delayed.

 

Wrap: seam checks and repairs while the unit waits.

05
INSTALL

Risk: contamination and damage during final handling.

 

Wrap: removed at the pad, so clean equipment goes into service.

Large industrial storage tanks fully sealed in ultra-tight white shrink wrap at a snowy outdoor facility in Ohio.

LONG-TERM EQUIPMENT STORAGE TEXAS

Months outside mean sun, humidity and dust. Plan a film chosen for UV exposure and scheduled wrap inspections. 

Heavy-haul truck transporting large industrial equipment fully sealed in ultra-tight white shrink wrap on a highway at sunset.

OVER-THE-ROAD TRANSPORT

Highway wrap focuses on tight film and secure seams that hold at speed.

Dark Texas industrial background featuring refinery towers, a Texas map silhouette, city skyline, and oil pumpjack at sunset.
CITIES WE SERVE

CITIES WE SERVE IN TEXAS

Shrink-Wrapped Tank Transport at.png

HOUSTON TX

INDUSTRIAL SHRINK WRAP HOUSTON TX

The Houston petrochemical corridor and Port Houston move heavy equipment constantly. We provide equipment shrink wrapping Houston TX for compressors, pumps and process equipment during plant turnaround and freight staging.

DISASTER RELIEF WRAPPING
Large industrial electrical equipment fully sealed in ultra-tight white shrink wrap at a Texas power substation.

LONGVIEW TX

INDUSTRIAL SHRINK WRAP LONGVIEW TX

Longview manufacturing and East Texas energy equipment need protection through humid weather. We wrap skid-mounted equipment and generators in laydown yards.

DISASTER RELIEF WRAPPING

DALLAS TX

Industrial shrink wrap Dallas TX for DFW logistics and data center equipment, including switchgear, generators and chillers.

SAN ANTONIO TX

Industrial shrink wrap San Antonio TX for equipment held on construction staging sites.

AUSTIN TX

Industrial shrink wrap Austin TX for equipment held on construction staging sites.

CORPUS CHRISTI TX

Industrial shrink wrap Corpus Christi TX for Gulf Coast equipment exposed to humidity and storms.

security (1).png

We also serve nearby towns across the Gulf Coast, East Texas, DFW and the Permian Basin. Not on the list? Request a proposal for your city.

PROOF

PROJECTS AND CASE STUDIES

Real jobs show how the wrap performs. Each case study names the equipment, the site risk and the wrap response. Browse the projects below, then ask for a proposal for your own equipment.

Large industrial equipment fully protected with tight white shrink wrap at a data center construction site.
SWITCHGEAR AND GENERATOR PROTECTION, DATA CENTER BUILD

01

problem-solving.png
PROBLEM

A data center build slipped its schedule, and switchgear, generators and chillers sat on open laydown yards for several weeks. Afternoon thunderstorms, humid air and construction dust threatened enclosures, controls and coils before commissioning.

solution.png
SOLUTION

Shrink Mobile crews wrapped each piece on site, drum-tight on all sides, with vents for moisture control and access panels for inspection. Work ran in phases around the construction crews, so no one had to move equipment.

pie-chart.png
RESULT

  • Equipment stayed clean and dry through the delay

  • Commissioning started without cleanup or rework

  • Wrap came off unit by unit as installation reached each pad

Large industrial cargo fully protected with ultra-tight white shrink wrap on a heavy-duty trailer at a port staging yard.
EXPORT SKID AND CONTAINER WRAP, PORT STAGING YARD

02

problem-solving.png
PROBLEM

Process skids and containerized equipment waited at a staging yard near the port before overseas shipment. Humid air, rain and repeated crane and forklift handling put finishes, fittings and controls at risk before the cargo reached the vessel.

solution.png
SOLUTION

Crews applied reinforced, sealed shrink wrap before loading, with extra reinforcement at lift points and corners. The wrap was built to stay intact through port staging, loading and transit, with marked access points for inspection.

pie-chart.png
RESULT

  • Cargo stayed dry and clean through port staging

  • Wrap stayed intact through each handoff

  • Equipment reached the vessel ready to ship

Large industrial switchgear equipment fully protected with tight white shrink wrap at a Texas industrial site.
Oversized industrial equipment fully shrink-wrapped and secured on a heavy-duty trailer at a port staging yard.
Large cylindrical industrial vessel fully protected with tight white shrink wrap for transport at an industrial facility.
ANSWERS

FREQUENTLY ASKED QUESTIONS

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
bottom of page