top of page
Wrapped Industrial Equipment at Harbor Dock
SHRINK MOBILE IN CONNECTICUT

INDUSTRIAL SHRINK WRAP SERVICES IN CONNECTICUT

Mobile equipment protection for aerospace and defense manufacturing, modular builds, chillers and industrial assets in Connecticut during storage, transportation and coastal winter staging.

Industrial shrink wrap in Connecticut means a mobile crew comes to your site and seals equipment in drum-tight, six-sided film. It protects machinery, HVAC units, modular builds and aerospace tooling from salt air, snow, ice and road grime during storage and transport. Proposals arrive within 24 hours.

security (1).png

SERVICE

Mobile crews wrap at your plant, yard or laydown area. Fitted, six-sided, heat-shrunk film.

location (3).png

AREAS

Hartford, New Haven, Bridgeport, Stamford, Groton, Waterbury and sites along I-95 and I-91.

box.png

ASSETS

Modular builds, chillers, turbines, switchgear, aerospace tooling, CNC machinery and oversized freight.

clock.png

PROPOSAL

Within 24 hours. Call 413-400-9727.

MOBILE WRAP CREWS

INDUSTRIAL SHRINK WRAP IN CONNECTICUT, DONE ON YOUR SITE

Industrial shrink wrapping covers equipment in heavy-duty film, then heat shrinks it into a tight shell on all six sides. The film follows every edge. Water, salt, dust and debris have nowhere to collect.

​

Our industrial shrink wrap services in Connecticut run on a mobile model. We bring the crew and the materials to your plant, laydown yard or job site. Nothing has to be trucked to a shop first. That matters for large items such as turbines, process skids and modular units.

​

The same approach supports industrial equipment shrink wrapping in Connecticut for short moves and for seasons of outdoor storage. Every wrap is built around the asset, with vents, lift points and access panels planned before film goes on. Your facility manager or project manager gets one point of contact from first call to removal.

Shrink-Wrapped Modular Unit Prep

01

ASSESS

We walk the site, measure the asset and note lift points, vents and access needs.

02

WRAP

Crews frame, wrap and heat shrink the film into a drum-tight six-sided shell.

03

INSPECT

Seams, corners and penetrations are checked before the crew leaves.

04

REMOVE

When storage or transit ends, the film is cut away and hauled off.

WHAT WE PROTECT IN CONNECTICUT

WHAT WE PROTECT IN CONNECTICUT

excavator.png

MODULAR BUILDING SHRINK WRAP CONNECTICUT

Fitted wrap keeps modular homes and prefab sections dry between the factory, the laydown yard and the foundation.

wave.png

FREIGHT SHRINK WRAPPING CONNECTICUT

Oversized freight and ground support equipment ride the I-95 and I-91 corridors sealed against spray and grit.

lorry.png

INDUSTRIAL EQUIPMENT STORAGE PROTECTION CONNECTICUT

Process skids, turbines, and outdoor equipment stay sealed against coastal salt air, heavy snow, and freeze-thaw slush.

security (1).png

MACHINERY SHRINK WRAPPING CONNECTICUT

Precision CNC machinery and aerospace tooling stay free of salt air and moisture during staging and relocation.

pallet.png

HVAC EQUIPMENT SHRINK WRAP CONNECTICUT

Chillers, cooling towers and rooftop units keep coils, fans and controls clean while they wait for commissioning.

security (1).png

INTERIOR SHRINK WRAP CONTAINMENT CONNECTICUT

Interior shrink wrap containment helps isolate dust, debris and active work zones during industrial renovations, maintenance and construction.

Modular homes

Process skids

Industrial turbines

Chillers

Cooling towers

Electrical switchgear

Aerospace tooling

Shipyard fabrication components

Ground support equipment

Precision CNC machinery

Oversized freight

FOUR SEASONS, TWO REGIONS

CONNECTICUT WEATHER AND SITE RISKS

Connecticut equipment faces coastal nor'easters, heavy wet snow, freeze-thaw ice, dense coastal salt air and wind-driven slush. Each season hits a different part of the asset. Here is how it plays out for industrial assets in storage.

WINTER

snow.png

Heavy wet snow, nor'easters, slush

wind.png

WHAT IT DOES

Snow melts into seams and vents, then refreezes. Wind-driven slush coats coils and controls.

wind.png

HOW WRAP HELPS

Sealed film sheds snow and keeps slush off exposed parts.

SPRING

rain (2).png

Freeze-thaw ice

wind.png

WHAT IT DOES

Repeated cycles push water into gaps. Bearings and fittings corrode.

wind.png

HOW WRAP HELPS

Tight film closes the gaps water uses to get in.

SUMMER

sun.png

Sun, humidity, coastal salt air

wind.png

WHAT IT DOES

UV ages seals and coatings. Salt settles on metal and electronics.

wind.png

HOW WRAP HELPS

UV-stabilized film blocks salt deposits and sun exposure.

FALL

wave.png

Early nor'easters, wind-driven rain

wind.png

WHAT IT DOES

Rain soaks staged freight and unwrapped machinery before winter arrives.

wind.png

HOW WRAP HELPS

Wrap goes on before the storm season so assets enter winter protected.

SHORELINE: GROTON TO STAMFORD

Salt air is constant. Naval supply chain parts, shipyard fabrication components and coastal outdoor storage need a sealed barrier all year.

INLAND: HARTFORD AND WATERBURY

Heavy wet snow and freeze-thaw ice drive the risk. Aerospace tooling and machinery staged outdoors need wrap that holds through repeated cycles.

BEYOND THE WEATHER

DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE

Weather is only part of the problem. Idle equipment also collects everything a yard throws at it. Our commercial machinery wrapping and HVAC equipment wrapping address each of these.

wind.png

Dirt and dust clog fans and coat controls.

wind.png

Debris scratches panels and jams moving parts.

wind.png

Moisture corrodes coils, bearings, and wiring.

wind.png

Rodents and birds nest in panels and chew cabling.

wind.png

Electronics damage follows when any reaches a control cabinet.

wind.png

UV cracks seals, hoses, and paint.

Tarp-Covered Industrial Chiller

LOOSE OR TORN TARP

Flaps in the wind and tears at the grommets

Traps moisture against the equipment

Leaves gaps for rodents and birds

Needs re-securing after every storm

Wrapped Industrial Chiller in Ou

DRUM-TIGHT SHRINK WRAP

Fits every edge and holds in high winds

Sheds water and snow

Leaves no gaps to nest in

Stays sealed until removal

MANUFACTURE TO INSTALL

PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY

Equipment is exposed at every stage, not only in the yard. Wrap needs change as the asset moves. See recent project photos for examples.

01
MANUFACTURE

Risk: dust and handling marks during factory staging.

​

Wrap: light protective film at the plant.

02
PROTECT

Risk: salt air and moisture at the yard.

​

Wrap: full six-sided seal.

03
TRANSPORT

Risk: spray, grit and wind on I-95 and I-91.

​

Wrap: reinforced film built for road speed.

04
STAGE

Risk: weeks outdoors at a laydown yard.

​

Wrap: vented, tight film.

05
INSTALL

Risk: damage at commissioning.

​

Wrap: removable sections for access.

LONG-TERM STORAGE

Deep-winter coastal outdoor storage needs a sealed, vented shell that lasts months. Vents control condensation inside the wrap.

OVER-THE-ROAD

Highway freight needs film reinforced against wind load and road spray. The wrap may be shorter-lived but must hold at speed.

security (1).png

Manufacturers can build wrap into shipping standards through the OEM & Factory Shrink Wrap Programs page 

STATEWIDE COVERAGE

CITIES WE SERVE IN CONNECTICUT

Crews serve industrial sites across the state. The largest metros are below.

GROTON

Industrial shrink wrap Groton CT for naval defense supply chain parts and shipyard fabrication components staged near the shore, where salt air never lets up.

STAMFORD

Industrial shrink wrap Stamford CT for corporate infrastructure projects, including chillers and electrical switchgear before commissioning.

HARTFORD

Industrial shrink wrap Hartford CT for aerospace tooling and precision CNC machinery moving through the state's aerospace engineering and defense corridors.

BRIDGEPORT

Industrial shrink wrap Bridgeport CT for freight and equipment staged along the I-95 logistics corridor.

NEW HAVEN

Industrial shrink wrap New Haven CT for bioscience equipment and commercial construction assets that wait on site before installation.

WATERBURY

Industrial shrink wrap Waterbury CT for manufacturing equipment and plant relocation moves.

REAL JOBS

PROJECTS AND CASE STUDIES

See how Shrink Mobile protects defense, aerospace, modular builds and commercial machinery across Connecticut. Staged equipment stays sealed through coastal nor'easters, winter ice, and dense salt air.

White-Wrapped Industrial Module
MODULAR BUILDING PROTECTION, GROTON SHIPYARD & DEFENSE CORRIDOR
problem-solving.png
PROBLEM

Modular office units and specialized prefabricated enclosures staged in an open laydown yard near Groton faced weeks of exposure before installation. Heavy nor'easters, coastal salt air from Long Island Sound, and freeze-thaw slush threatened exposed window headers, door joints, and wall framing.

solution.png
SOLUTION

Shrink Mobile crews wrapped each modular section drum-tight on all six sides directly in the laydown yard. Technicians heat-welded all seams, protected structural lifting lugs, and installed perimeter weather-shielded vents to maintain internal air balance without allowing damp marine air to pool inside.

pie-chart.png
RESULT
  • Wall framing, subfloors, and interior utility runs stayed completely dry

  • Coastal salt fog and wind-driven rain were blocked from sensitive joints

  • Sections remained spotless and ready for crane pick and immediate set

Tightly Wrapped Industrial Chill
CHILLER AND AEROSPACE TOOLING PROTECTION, HARTFORD MANUFACTURING PLANT
problem-solving.png
PROBLEM

Two commercial HVAC chillers and precision aerospace machining skids were staged outdoors at a Hartford facility during an extended commissioning delay. Winter freeze-thaw cycles, road grit from nearby logistics routes, and wet snow threatened delicate coil fins, control cabinets, and exposed alloy surfaces.

solution.png
SOLUTION

Crews encapsulated each unit on site with heavy-duty, UV-stabilized white shrink wrap pulled drum-tight across custom padded frames. Accessible inspection zipper panels were installed over primary gauge clusters, and all perimeter base skirts were heat-sealed to prevent ground moisture creep.

pie-chart.png
RESULT
  • Chiller coil fins, fans, and digital controls stayed free of ice and grit

  • Bare metal tooling surfaces remained free of corrosion and surface rust

  • Covers were cleanly removed on commissioning day with zero equipment cleanup needed

PROOF

PHOTO GALLERY

ANSWERS

FREQUENTLY ASKED QUESTIONS

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
Taut-Wrapped Industrial Equipmen
READY WHEN YOU ARE

GET A 24-HOUR PROPOSAL FOR YOUR CONNECTICUT EQUIPMENT

Tell us what you need wrapped, where it sits and how long it stays there.

bottom of page