top of page
Manufacturing machinery, industrial chiller and shipyard equipment protected with white sh
MOBILE SHRINK WRAP SERVICES IN MAINE

INDUSTRIAL SHRINK WRAP SERVICES IN MAINE

Mobile equipment protection for marine and shipyard equipment, manufacturing machinery and other industrial assets in Maine during storage, transportation and project delays.

Industrial shrink wrap in Maine is a fitted, heat-sealed film cover that protects manufacturing machinery, marine and shipyard equipment, HVAC and cooling equipment and freight from snow, ice, wind and coastal salt. Shrink Mobile crews wrap equipment on site at plants, yards and job sites. We send a proposal within 24 hours.

SERVICE

Mobile, on-site industrial shrink wrapping

WHERE

Maine plants, yards and job sites, confirmed by area

PROTECTS

Manufacturing machinery, shipyard equipment, HVAC

WRAP TYPE

Fitted, sealed cover; bottom coverage depends on access

TALK TO US

INDUSTRIAL EQUIPMENT SHRINK WRAPPING IN MAINE

INDUSTRIAL SHRINK WRAP IN MAINE: HOW THE SERVICE WORKS

​Shrink Mobile provides industrial shrink wrap services in Maine for equipment that sits outside, waits on a delivery or travels by road in winter. Our mobile shrink wrap services in Maine come to your plant, yard or job site. You do not move the equipment. We wrap manufacturing machinery, marine and shipyard equipment, chillers and cooling towers, modular buildings, generators and freight.

​Industrial equipment shrink wrapping in Maine covers up to six sides where access allows, so snow, salt spray and road grit have fewer ways in from below. Bottom coverage depends on access and the quoted scope. Machinery shrink wrapping and heavy machinery shrink wrap in Maine follow the same method, scaled to the machine. A tarp covers equipment. A fitted wrap seals it.

Equipment makers can wrap before a unit leaves the factory. See the OEM & Factory Shrink Wrap Programs, learn why customers choose Shrink Mobile, or ask for a proposal.

01

ASSESS

We review the equipment, access, lifting points and dimensions.

02

WRAP

Crews pad sharp edges and shrink the film drum-tight.

03

INSPECT

We check every seam, seal and vent before the job is done.

04

REMOVE

The wrap comes off cleanly when the equipment is ready to install or ship. Removal and any return visits are scoped in your proposal.

INDUSTRIAL SHRINK WRAP SERVICES IN MAINE

WHAT WE PROTECT IN MAINE

We wrap six groups of assets in Maine. Each card links to its service page.

generators

tooling

transformers

switchgear

LONG-TERM EQUIPMENT STORAGE IN MAINE

HOW MAINE REGIONS DIFFER

Maine runs from a long, rugged coast to northern forests. Salt, snow and distance change with the region.

01

SOUTHERN MAINE: PORTLAND

Port freight and plant projects face nor'easters, coastal salt and winter road salt.

02

MIDCOAST: BATH

Shipbuilding and the marine industry face salt spray, fog and winter wind.

03

CENTRAL MAINE: LEWISTON AND AUGUSTA

Manufacturing, paper and wood products face deep cold, snow and ice.

04

BANGOR AND NORTHERN MAINE

Paper mills, wood products and forestry face deep cold and long hauls.

Wrap before the first hard freeze and before nor'easter season. For storm work see emergency storm damage response; for HVAC equipment waits see HVAC equipment storage protection.

Manufacturing machinery and compressor equipment protected with tight white shrink wrap at
INDUSTRIAL EQUIPMENT STORAGE PROTECTION IN MAINE

MAINE WEATHER AND SITE RISKS

Risk changes by season and by region. January differs from July, and Portland differs from northern Maine.

Industrial chillers and manufacturing machinery protected with white shrink wrap during wi

WINTER

Dec to Feb

WEATHER

DAMAGE

WRAP

Nor'easters, deep cold and heavy snow.

Nor'easter wind and wet snow tear loose covers, and deep cold makes plastics and seals brittle.

A fitted wrap sheds snow and keeps drifts out. It cannot support deep snow.

SUMMER

Jun to Aug

WEATHER

DAMAGE

WRAP

Humid air, fog and thunderstorms.

Fog and humidity condense on stored metal, and coastal salt settles on exposed surfaces.

Planned ventilation lets the unit breathe while the film blocks salt and dust.

SPRING

Mar to May

WEATHER

DAMAGE

WRAP

Thaw, mud season and heavy rain.

Meltwater pools around yards and refreezes overnight in seams and fittings.

Sealed seams keep meltwater out while equipment waits for install.

FALL

Sep to Nov

WEATHER

DAMAGE

WRAP

Gales, nor'easters and early snow.

Coastal gales loosen tarps and throw salt spray, and early snow reaches equipment still waiting outside.

A fitted wrap has no loose edges for gales to catch. It does not replace tie-downs.

MACHINERY SHRINK WRAPPING IN MAINE

DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE

Maine equipment rarely fails in one storm. It wears down while it waits. Six exposures cause the damage.

01
COILS
DIRT AND GRIT

Road grit, sawdust and yard dust pack into coils and fans and scratch finishes.

02
FANS AND BEARINGS
DEBRIS

Branches, gravel and storm trash dent fins and tear loose covers.

03
CONTROLS AND ELECTRONICS
MOISTURE AND SALT

Snowmelt, rain, condensation and coastal salt corrode controls, bearings and electronics.

Unwrapped industrial HVAC equipment exposed to coastal salt, road grit, sawdust and moisture at a Maine storage yard
04
FINISH AND LABELS
UV

Sunlight breaks down plastics, rubber and labels over months outdoors.

05
NESTING AND WIRING
RODENTS AND BIRDS

Warm, sheltered units attract nesting animals that chew wiring and foul fans.

06
THE RESULT
EQUIPMENT DAMAGE

Clogged coils, seized fans, failed controls, worn bearings and shorted electronics.

LOOSE OR TORN TARP VS DRUM-TIGHT SHRINK WRAP

A loose tarp does not stop these risks. Wind lifts it, snow and water pool in it and corners tear. A fitted wrap closes those gaps.

FIT

TARP

Drapes and flaps in wind.

WRAP

Heat-shrunk to the shape of the unit.

SEAMS

TARP

Gaps, ties and open corners.

WRAP

Heat-sealed, with sealed access doors.

MOISTURE

TARP

Water pools and seeps in.

WRAP

Sealed shell sheds snow, rain and meltwater.

PESTS

TARP

Open gaps let rodents and birds in.

WRAP

Sealed coverage blocks most entry points.

OVER TIME

TARP

Sags, tears and gets retied.

WRAP

Stays tight with planned checks.

FREIGHT SHRINK WRAPPING IN MAINE

PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY

01
MANUFACTURE

Finished units wait at factory staging. We can wrap before the unit leaves the plant.

02
PROTECT

Bare units pick up dust, scratches and salt. Crews wrap and seal doors and plan ventilation.

03
TRANSPORT

Freight transportation exposes units to road spray, road salt and wind. The cover rides with the load.

04
STAGE

Laydown yards, a plant relocation or a winter layup can hold units outside for weeks.

05
INSTALL

The wrap comes off cleanly when the unit is ready to set, leaving it clean and dry.

LONG-TERM EQUIPMENT STORAGE IN MAINE

Months of outdoor storage need a sealed cover with planned ventilation and scheduled checks for snow load, wind and thaw.

OVER-THE-ROAD TRANSPORT PROTECTION

Winter highway moves need a cover that stays tight against road spray, road salt and wind, with sealed access points.

OEM EQUIPMENT PROTECTION IN MAINE

Manufacturers can wrap before shipping. Learn about factory-stage wrapping for OEMs, freight and transit protection and cooling tower protection.

CITIES WE SERVE IN MAINE

Industrial shrink wrap in Portland, Bangor and Lewiston

EQUIPMENT SHRINK WRAPPING IN PORTLAND, ME

Industrial shrink wrap in Portland, ME supports port freight and plant projects, where equipment waits in coastal salt and winter snow.

INDUSTRIAL SHRINK WRAP IN BANGOR, ME

Bangor paper, wood products and plant equipment stays covered through deep cold and heavy snow.

INDUSTRIAL SHRINK WRAP IN LEWISTON, ME

Lewiston manufacturing keeps machinery, conveyors and tooling covered in yards and during relocation.

INDUSTRIAL SHRINK WRAP IN BATH, ME

Shipyard components and marine engines stay covered against salt spray and winter wind.

INDUSTRIAL SHRINK WRAP IN AUGUSTA, ME

Plant and construction equipment stays covered through snow, ice and thaw.

MIDCOAST SHIPYARDS AND MARINE INDUSTRY

Marine engines and shipyard components wrapped for storage and winter staging.

We also serve nearby towns, including Brunswick, Auburn, Biddeford, Waterville, Rockland and Brewer. See all Shrink Mobile service areas.

MAINE ILLUSTRATIVE APPLICATIONS

Marine equipment shrink wrap in Maine

Manufacturing production machinery and conveyor equipment protected with white shrink wrap

MACHINERY AND CONVEYOR PROTECTION DURING PLANT RELOCATION, LEWISTON, ME

PROBLEM

Production-line machinery and conveyors waited in a plant yard during a relocation. Nor'easter wind, deep cold and road salt put finishes, fittings and controls at risk before the equipment was set.

SOLUTION

Shrink Mobile crews wrapped each piece on site, with sealed seams and ventilation, marked access points for inspection and follow-up seam checks arranged as a separate visit.

RESULT

Equipment stays dry and free of salt through the wait

Setup starts without cleanup or rework

Wrap comes off piece by piece as equipment reaches the floor

Marine engine and shipyard mechanical components protected with tight white shrink wrap in

SHIPYARD COMPONENT PROTECTION FOR WINTER STAGING, BATH, ME

PROBLEM

Marine engines and shipyard components waited in an outdoor yard through winter before installation. Salt spray, snow and wind threatened bearings, fittings and electronics.

SOLUTION

Crews wrapped each component in sealed film with planned ventilation and marked access points, scoped around yard access and weather.

RESULT

Components stay clean and dry through winter

Inspections use access points without removing the cover

No rework is needed before installation

PROOF

PHOTO GALLERY

HEAVY MACHINERY SHRINK WRAP IN MAINE

MAINE INDUSTRIAL SHRINK WRAP FAQS

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
Large manufacturing, cooling and shipyard equipment protected with smooth white industrial
INDUSTRIAL SHRINK WRAP IN MAINE

REQUEST AN INDUSTRIAL SHRINK WRAP PROPOSAL IN MAINE

Tell us what needs wrapping and where it sits. We reply with a proposal within 24 hours.

bottom of page