top of page
Solar inverters, oilfield compressors and industrial HVAC equipment protected with white s
MOBILE SHRINK WRAP SERVICES IN NEW MEXICO

INDUSTRIAL SHRINK WRAP SERVICES IN NEW MEXICO

Mobile equipment protection for solar and renewable equipment, oilfield and refinery equipment and other industrial assets in New Mexico during storage, transportation and project delays.

Industrial shrink wrap in New Mexico is a fitted, heat-sealed film cover that protects solar and renewable equipment, oilfield and process equipment, HVAC and cooling equipment and freight from dust, UV, rain and hail debris. Shrink Mobile crews wrap equipment on site at plants, yards and remote sites. We send a proposal within 24 hours.

SERVICE

Mobile, on-site industrial shrink wrapping

WHERE

New Mexico plants, yards and remote sites, confirmed by area

PROTECTS

Solar gear, process equipment, HVAC, chillers

WRAP TYPE

Fitted, sealed cover; bottom coverage depends on access

TALK TO US

INDUSTRIAL EQUIPMENT SHRINK WRAPPING IN NEW MEXICO

INDUSTRIAL SHRINK WRAP IN NEW MEXICO: HOW THE SERVICE WORKS

Shrink Mobile provides industrial shrink wrap services in New Mexico for equipment that sits outside in the sun, waits at a remote site or travels long desert distances. Our mobile shrink wrap services in New Mexico come to your plant, yard or job site. You do not move the equipment. We wrap solar inverters and enclosures, oilfield and process equipment, chillers and cooling towers, HVAC units, modular buildings, generators and freight.

​Industrial equipment shrink wrapping in New Mexico covers up to six sides where access allows, so dust, rain and grit have fewer ways in from below. Bottom coverage depends on access and the quoted scope, and crews plan ventilation for heat. Machinery shrink wrapping and heavy machinery shrink wrap in New Mexico follow the same method, scaled to the machine. A tarp covers equipment. A fitted wrap seals it.

Equipment makers can wrap before a unit leaves the factory. See the OEM & Factory Shrink Wrap Programs, learn why customers choose Shrink Mobile, or ask for a proposal.

01

ASSESS

We review the equipment, access, lifting points and dimensions.

02

WRAP

Crews pad sharp edges and shrink the film drum-tight.

03

INSPECT

We check every seam, seal and vent before the job is done.

04

REMOVE

The wrap comes off cleanly when the equipment is ready to install or ship. Removal and any return visits are scoped in your proposal.

INDUSTRIAL SHRINK WRAP SERVICES IN NEW MEXICO

WHAT WE PROTECT IN NEW MEXICO

We wrap six groups of assets in New Mexico. Each card links to its service page.

generators

tooling

transformers

switchgear

LONG-TERM EQUIPMENT STORAGE IN NEW MEXICO

HOW NEW MEXICO REGIONS DIFFER

New Mexico runs from high desert plains to mountain valleys to the Permian Basin. Sun, wind and dust change with the region.

01

ALBUQUERQUE AND RIO RANCHO

Tech and fab sites, labs and construction face strong UV, spring wind and monsoon storms.

02

NORTHERN NEW MEXICO: SANTA FE

Lab and construction sites face cold nights, snow and strong high-altitude sun.

03

SOUTHERN NEW MEXICO: LAS CRUCES

Solar and construction sites face heat, blowing dust and monsoon rain.

04

SOUTHEAST: ROSWELL AND HOBBS

Permian Basin oil and gas sites face wind, dust and long remote hauls.

Wrap before spring wind season and before monsoon season. For storm work see emergency storm damage response; for HVAC equipment waits see HVAC equipment storage protection.

Solar equipment, industrial compressors and generators protected with white shrink wrap at
INDUSTRIAL EQUIPMENT STORAGE PROTECTION IN NEW MEXICO

NEW MEXICO WEATHER AND SITE RISKS

Risk changes by season and by elevation. April differs from August, and Santa Fe differs from Las Cruces.

White shrink-wrapped industrial equipment staged outdoors during dusty monsoon weather in

WINTER

Dec to Feb

WEATHER

DAMAGE

WRAP

Cold nights, snow in the north and wind.

Cold nights bring frost, and snow in northern and mountain areas melts and refreezes in seams.

Sealed wrap protects controls & cargo from frost and meltwater, without regulating temperature.

SUMMER

Jun to Aug

WEATHER

DAMAGE

WRAP

Heat, strong UV and monsoon rain.

Strong sun breaks down plastics, rubber and labels, and monsoon storms bring sudden rain, wind and hail.

The film shades the surface and blocks dust and rain. It does not stop hail impact.

SPRING

Mar to May

WEATHER

DAMAGE

WRAP

High wind and blowing dust.

Wind tears unsecured covers and drives fine dust into coils, fans and enclosures.

A fitted wrap has no loose edges for wind to catch, and sealed seams keep dust out.

FALL

Sep to Nov

WEATHER

DAMAGE

WRAP

Dry air and cool nights.

Dust settles on equipment waiting outside, and cool nights bring condensation under loose covers.

Planned ventilation lets the unit breathe while the film blocks dust.

MACHINERY SHRINK WRAPPING IN NEW MEXICO

DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE

​New Mexico equipment rarely fails in one storm. It wears down while it waits. Six exposures cause the damage.

01
COILS
DIRT AND DUST

Fine desert dust packs into coils, fans and enclosures and scratches finishes.

02
FANS AND BEARINGS
DEBRIS

​Wind-blown gravel, tumbleweeds and trash dent fins and tear loose covers.

03
CONTROLS AND ELECTRONICS
MOISTURE AND HUMIDITY

Monsoon rain and condensation corrode controls, bearings and electronics.

Unprotected industrial HVAC equipment showing accumulated dust, debris and outdoor weather
04
FINISH AND LABELS
UV

Strong high-desert sun breaks down plastics, rubber and labels within months outdoors.

05
NESTING AND WIRING
RODENTS AND BIRDS

Warm, sheltered units attract nesting animals that chew wiring and foul fans.

06
THE RESULT
EQUIPMENT DAMAGE

Clogged coils, seized fans, failed controls, worn bearings and shorted electronics.

LOOSE OR TORN TARP VS DRUM-TIGHT SHRINK WRAP

A loose tarp does not stop these risks. Wind lifts it, rain pools in it and corners tear. A fitted wrap closes those gaps.

FIT

TARP

Drapes and flaps in wind.

WRAP

Heat-shrunk to the shape of the unit.

SEAMS

TARP

Gaps, ties and open corners.

WRAP

Heat-sealed, with sealed access doors.

MOISTURE

TARP

​Water pools and seeps in.

WRAP

Sealed shell sheds rain and meltwater.

PESTS

TARP

Open gaps let rodents and birds in.

WRAP

Sealed coverage blocks most entry points.

OVER TIME

TARP

Sags, tears and gets retied.

WRAP

Stays tight with planned checks.

FREIGHT SHRINK WRAPPING IN NEW MEXICO

PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY

01
MANUFACTURE

Finished units wait at factory staging. We can wrap before the unit leaves the plant.

02
PROTECT

Bare units pick up dust, scratches and moisture. Crews wrap and seal doors and plan ventilation.

03
TRANSPORT

​Freight transportation over long desert hauls exposes units to road spray, grit and wind. The cover rides with the load.

04
STAGE

​Site delivery, laydown yards and outdoor storage can hold units for weeks ahead of a plant turnaround.

05
INSTALL

The wrap comes off cleanly when the unit is ready to set, leaving it clean and dry.

LONG-TERM EQUIPMENT STORAGE IN NEW MEXICO

Months of outdoor storage need a sealed cover with planned ventilation and scheduled checks for UV, wind and monsoon rain.

OVER-THE-ROAD TRANSPORT PROTECTION

Long hauls need a cover that stays tight against road spray, grit and wind, with sealed access points.

OEM EQUIPMENT PROTECTION IN NEW MEXICO

Manufacturers can wrap before shipping. Learn about factory-stage wrapping for OEMs, freight and transit protection and cooling tower protection.

CITIES WE SERVE IN NEW MEXICO

Industrial shrink wrap in Albuquerque, Santa Fe and Las Cruces

EQUIPMENT SHRINK WRAPPING IN ALBUQUERQUE, NM

Industrial shrink wrap in Albuquerque, NM supports tech and fab projects, labs and construction, where HVAC units and chillers wait in strong sun.

INDUSTRIAL SHRINK WRAP IN SANTA FE, NM

Santa Fe lab and construction equipment stays covered through cold nights, snow and strong UV.

INDUSTRIAL SHRINK WRAP IN LAS CRUCES, NM

Las Cruces solar, plant and construction equipment stays covered against dust and monsoon rain.

INDUSTRIAL SHRINK WRAP IN RIO RANCHO, NM

Fab and commercial project equipment stays covered during construction staging.

INDUSTRIAL SHRINK WRAP IN ROSWELL, NM

Plant and freight equipment stays covered through wind and blowing dust.

INDUSTRIAL SHRINK WRAP IN HOBBS, NM

Permian Basin skids, compressors and pumps stay covered at laydown yards.

We also serve nearby towns, including Los Alamos, Farmington, Carlsbad, Artesia, Los Lunas and Clovis. See all Shrink Mobile service areas.

NEW MEXICO ILLUSTRATIVE APPLICATIONS

Solar equipment shrink wrap in New Mexico

Solar inverter cabinets and electrical enclosures protected with white industrial shrink w

SOLAR INVERTER AND ENCLOSURE PROTECTION, LAS CRUCES, NM

PROBLEM

Solar inverters and electrical enclosures waited at a site for several weeks before installation. Strong sun, blowing dust and monsoon rain threatened controls, wiring and finishes.

SOLUTION

Shrink Mobile crews wrapped components on site, with sealed seams and planned ventilation, access points for inspection and follow-up seam checks arranged as a separate visit.

RESULT

Equipment stays clean and dry through the wait

Installation starts without cleanup or rework

Wrap comes off piece by piece as each unit reaches its pad

Skid-mounted process equipment, compressors and pumps protected with industrial shrink wra

PROCESS SKID AND PUMP PROTECTION, HOBBS, NM

PROBLEM

​Skid-mounted equipment, compressors and pumps waited in a remote laydown yard ahead of a plant turnaround. Wind, dust and heat threatened bearings, seals and controls before installation.

SOLUTION

Crews wrapped each piece in sealed film with planned ventilation and marked access points, scoped around site access and weather.

RESULT

Equipment stays clean and dry through the wait

Turnaround work starts without cleanup or rework

Wrap comes off piece by piece as each unit reaches its pad

HEAVY MACHINERY SHRINK WRAP IN NEW MEXICO

NEW MEXICO INDUSTRIAL SHRINK WRAP FAQS

HEAVY MACHINERY SHRINK WRAP IN NEW MEXICO

NEW MEXICO INDUSTRIAL SHRINK WRAP FAQS

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
Solar inverters, oilfield compressors and industrial HVAC equipment protected with white s
INDUSTRIAL SHRINK WRAP IN NEW MEXICO

REQUEST AN INDUSTRIAL SHRINK WRAP PROPOSAL IN NEW MEXICO

Tell us what needs wrapping and where it sits. We reply with a proposal within 24 hours.

bottom of page