
LOUISIANA SERVICE AREA
INDUSTRIAL SHRINK WRAP SERVICES IN LOUISIANA
Mobile equipment protection for oilfield and refinery equipment, export and port cargo and other industrial assets in Louisiana during storage, transportation and project delays.
Industrial shrink wrap in Louisiana is a fitted, heat-shrunk film shell applied to equipment on your site. Our crews wrap skids, compressors, pumps, chillers and freight drum-tight on six sides. The shell keeps out rain, salt air, dust and pests. We send a proposal within 24 hours.
SERVICE
Mobile, on-site industrial shrink wrapping. Drum-tight on all six sides, for storage, transportation and project delays.
AREAS
Minden, New Orleans, Baton Rouge, Lake Charles, Lafayette, Shreveport and nearby towns.
ASSETS
Skids, compressors, pumps, chillers, cooling towers and oversized freight.
PROPOSAL
Within 24 hours. Call 413-400-9727.
OUR SERVICE
MOBILE INDUSTRIAL SHRINK WRAP IN LOUISIANA
Industrial equipment shrink wrapping covers a machine in a heat-shrunk plastic skin that follows its shape. It is not a tarp. There is no flapping, no pooling and no gap for wind to find.
Our mobile shrink wrap services come to your plant, laydown yard or port staging area. We wrap machinery and heavy machinery where it sits, so you do not pay for a crane lift or a trip to a shop.
The wrap is sealed on six sides, including the top and the base. Where equipment needs airflow, we add vents. Where a unit needs access, we add a zip door. A wrapped compressor or pump skid can wait out a wet season and still be clean at startup.

01
ASSESS
We check the equipment, access, power lines and ground.
02
WRAP
We frame where needed and shrink the film tight.
03
INSPECT
We check seams, vents and seals before we leave.
04
REMOVE
We cut the wrap off cleanly when you are ready to install.
FIVE CORE SERVICES
WHAT WE PROTECT IN LOUISIANA
MODULAR BUILDING SHRINK WRAP LOUISIANA
Prefab units wait on foundations, permits and cranes. Wrap keeps wet weather out of framing and finishes until set day.
HVAC EQUIPMENT SHRINK WRAP LOUISIANA
Chillers and cooling towers have fragile coils and fans. Wrap protects them from humidity, salt air and debris in storage.
NOT ON THE LIST?
If it fits under film, we wrap it. Call 413-400-9727 and describe what is sitting outside.
Compressors
Pumps and process equipment
Skid-mounted equipment
Chillers
Containerized equipment
Oversized freight
HVAC units
Cooling towers
SEASON BY SEASON
LOUISIANA WEATHER AND SITE RISKS
Louisiana weather is hard on exposed equipment. Hurricanes bring wind and flooding. Humidity feeds corrosion and mold all year. Salt air eats metal near the coast. Wrapped equipment stays sealed through all of it. For recovery work after a storm, see disaster relief wrapping.
SPRING
Heavy rain and flooding
WHAT IT DOES
Water reaches controls, enclosures and fasteners.
HOW WRAP HELPS
A sealed skin keeps rain and splash out of joints.
SUMMER
Heat, humidity and UV
WHAT IT DOES
Moisture and sun age gaskets, finishes and wiring.
HOW WRAP HELPS
Vented film limits condensation and blocks UV.
FALL
Hurricane season, wind and debris
WHAT IT DOES
Wind-driven rain and debris clog coils and fans.
HOW WRAP HELPS
A drum-tight shell does not flap or tear loose.
WINTER
Cool, damp spells, freezes
WHAT IT DOES
Damp air and cold snaps stress controls and bearings.
HOW WRAP HELPS
The wrap holds humidity away from sensitive parts.
GULF COAST PETROCHEMICAL
Salt air and storm surge hit plants and terminals between Lake Charles, Baton Rouge and New Orleans. Corrosion is the steady threat.
ACADIANA AND LAFAYETTE
Oilfield service yards store equipment outdoors for months. Humidity and flood risk are the usual test.
NORTH LOUISIANA
Minden and Shreveport see less salt but heavy rain, heat and storm wind. Staging and freight transport drive most jobs.
RISKS AND DAMAGE
DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE
Unwrapped equipment collects problems you cannot see until startup. Wrap addresses each one.
Dirt and dust clog coils and foul sensitive parts.
Debris jams fans and scratches finishes.
Humidity and salt air reach controls, bearings and electronics.
UV fades and cracks exposed plastics and seals.
Rodents and birds nest in enclosures and chew wiring.
Damaged coils, fans and controls delay commissioning.

LOOSE OR TORN TARP
Flaps in wind and tears at the edges
Traps water and condensation
Leaves gaps for rodents and birds
Needs repair during the season

DRUM-TIGHT SHRINK WRAP
Follows the shape of the equipment
Sheds rain and wind-driven spray
Seals six sides against pests and dust
Holds through the storage period
Need the whole picture? See how wrap protects equipment through every stage.
EQUIPMENT JOURNEY
PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY
Equipment faces different risks from factory to install. Plant turnaround schedules, port delays and project slips each add exposure. Wrap adapts at each step.
01
MANUFACTURE
Dust and handling marks in factory staging. Wrap seals finished units.
02
PROTECT
Idle time outdoors. A tight shell shields from weather.
04
STAGE
Yards and port staging bring humidity, salt and debris. Wrap is vented.
05
INSTALL
Clean removal leaves a ready unit at turnaround or commissioning.

LONG-TERM STORAGE
Months of heat, humidity and storm exposure need a durable, vented shell. See how we wrap chillers for storage.
OVER-THE-ROAD
Highway transport needs a smooth, tight profile that resists wind and spray. Different job, different method. OEM & Factory Shrink Wrap Programs
WHERE WE WORK
CITIES WE SERVE IN LOUISIANA
Crews serve industrial sites across the state. The largest metros are below.
MINDEN
Our featured Louisiana project area. Indust-rial shrink wrap Minden LA covers equipment staging during active industrial work.
LAKE CHARLES
LNG terminals and export cargo. Industrial shrink wrap Lake Charles LA protects skids and freight outdoors.
NEW ORLEANS
Port and export cargo. Industrial shrink wrap New Orleans LA protects freight in port staging.
LAFAYETTE
Oilfield equipment yards. Industrial shrink wrap Lafayette LA protects pumps and process equipment in storage.
BATON ROUGE
Petrochemical corridor. Industrial shrink wrap Baton Rouge LA covers plant equipment through turnaround delays.
SHREVEPORT
North Louisiana industry. Industrial shrink wrap Shreveport LA covers machinery during storage and transit.
EQUIPMENT PROTECTION
LOUISIANA INDUSTRIAL PROTECTION SCENARIOS
These Louisiana scenarios illustrate how fitted shrink wrap can protect industrial equipment during storage, transportation and project delays. From petrochemical machinery to oversized port cargo, each application addresses specific environmental and handling risks.

COMPRESSOR AND PUMP SKID PROTECTION, LAKE CHARLES LA
PROBLEM
Skid-mounted compressors and pumps may face humidity, salt air and heavy rain during extended outdoor staging near petrochemical facilities.
SOLUTION
Fitted shrink wrap can help protect skid-mounted equipment with sealed seams, planned ventilation and access points where required.
RESULT
-
Helps limit rain and moisture exposure
-
Reduces contact with salt air and dust
-
Provides removable protection during storage

OVERSIZED INDUSTRIAL CARGO PROTECTION, NEW ORLEANS LA
PROBLEM
Oversized industrial cargo at port staging areas faces rain, salt spray and handling exposure before overseas shipment.
SOLUTION
Custom-fitted shrink wrap can protect equipment surfaces during staging, with reinforced edges and access provisions based on cargo requirements.
RESULT
-
Helps shield cargo from rain and salt spray
-
Reduces exposure to dust and debris
-
Supports protection during port staging
PROOF
PHOTO GALLERY
ANSWERS
FREQUENTLY ASKED QUESTIONS
- 01
- 02
- 03
- 04
- 05
- 06
- 07


_PNG.png)







