top of page
Manufacturing machinery, marine engines and HVAC equipment protected with white industrial
MOBILE SHRINK WRAP SERVICES IN NEW HAMPSHIRE

INDUSTRIAL SHRINK WRAP SERVICES IN NEW HAMPSHIRE

Mobile equipment protection for marine and shipyard equipment, manufacturing machinery and other industrial assets in New Hampshire during storage, transportation and project delays.

Industrial shrink wrap in New Hampshire is a fitted, heat-sealed film cover that protects manufacturing machinery, marine and shipyard equipment, HVAC and cooling equipment and freight from snow, ice, rain and coastal salt. Shrink Mobile crews wrap equipment on site at plants, yards and job sites. We send a proposal within 24 hours.

SERVICE

Mobile, on-site industrial shrink wrap

WHERE

New Hampshire plants, yards and job sites, confirmed by area

PROTECTS

Machinery, Machinery, shipyard gear, HVAC, chillers, freight

WRAP TYPE

Fitted, sealed cover; bottom coverage depends on access

TALK TO US

INDUSTRIAL EQUIPMENT SHRINK WRAPPING IN NEW HAMPSHIRE

INDUSTRIAL SHRINK WRAP IN NEW HAMPSHIRE: HOW THE SERVICE WORKS

Shrink Mobile provides industrial shrink wrap services in New Hampshire for equipment that sits outside, waits on a delivery or travels by road in winter. Our mobile shrink wrap services in New Hampshire come to your plant, yard or job site. You do not move the equipment. We wrap manufacturing machinery, marine and shipyard equipment, chillers and cooling towers, modular buildings, generators and freight.

Industrial equipment shrink wrapping in New Hampshire covers up to six sides where access allows, so snow, meltwater and road grit have fewer ways in from below. Bottom coverage depends on access and the quoted scope. Machinery shrink wrapping and heavy machinery shrink wrap in New Hampshire follow the same method, scaled to the machine. A tarp covers equipment. A fitted wrap seals it.

Equipment makers can wrap before a unit leaves the factory. See the OEM & Factory Shrink Wrap Programs, learn why customers choose Shrink Mobile, or ask for a proposal.

01

ASSESS

We review the equipment, access, lifting points and dimensions.

02

WRAP

Crews pad sharp edges and shrink the film drum-tight.

03

INSPECT

We check every seam, seal and vent before the job is done.

04

REMOVE

The wrap comes off cleanly when the equipment is ready to install or ship. Removal and any return visits are scoped in your proposal.

INDUSTRIAL SHRINK WRAP SERVICES IN NEW HAMPSHIRE

WHAT WE PROTECT IN NEW HAMPSHIRE

We wrap six groups of assets in New Hampshire. Each card links to its service page.

generators

tooling

transformers

switchgear

LONG-TERM EQUIPMENT STORAGE IN NEW HAMPSHIRE

HOW NEW HAMPSHIRE REGIONS DIFFER

New Hampshire runs from a short Atlantic coast to the White Mountains. Snow, salt and cold change with the region.

01

NASHUA AND MANCHESTER

Defense and electronics manufacturing face nor'easters, snow and winter ice.

02

SEACOAST: PORTSMOUTH

Shipyards and ports face coastal salt, fog and nor'easter wind.

03

CONCORD AND THE LAKES REGION

Construction and plant projects face heavy snow and spring freeze-thaw.

04

WHITE MOUNTAINS AND NORTH COUNTRY

Deep snow, deep cold and long hauls reach remote job sites.

Wrap before the first hard freeze and before nor'easter season. For storm work see emergency storm damage response; for HVAC equipment waits see HVAC equipment storage protection.

Shrink-wrapped manufacturing machinery and industrial equipment at a New Hampshire storage
INDUSTRIAL EQUIPMENT STORAGE PROTECTION IN NEW HAMPSHIRE

NEW HAMPSHIRE WEATHER AND SITE RISKS

Risk changes by season and by region. January differs from July, and Portsmouth differs from the North Country.

White shrink-wrapped industrial machinery protected against snow and severe winter weather

WINTER

Dec to Feb

WEATHER

DAMAGE

WRAP

Nor'easters, snow and ice.

Nor'easter wind and wet snow tear loose covers, and ice adds weight and freezes in seams.

A fitted, sealed wrap sheds snow & keeps sleet out. It isn't structural support for heavy snow.

SUMMER

Jun to Aug

WEATHER

DAMAGE

WRAP

Humid heat and thunderstorms.

Condensation forms under loose covers, and storm wind throws dust and debris at idle units.

Planned ventilation lets the unit breathe while the film blocks rain and grit.

SPRING

Mar to May

WEATHER

DAMAGE

WRAP

Mud season, freeze-thaw and heavy rain.

Repeated freezing pulls meltwater into gaps, and it refreezes overnight and cracks seals.

Sealed seams keep meltwater out while equipment waits for install.

FALL

Sep to Nov

WEATHER

DAMAGE

WRAP

Coastal gales, nor'easters and early snow.

Gales loosen tarps, and early snow and road salt reach equipment still waiting outside.

A fitted wrap has no loose edges for gales to catch. It does not replace tie-downs.

MACHINERY SHRINK WRAPPING IN NEW HAMPSHIRE

DIRT, DEBRIS, RODENTS AND EQUIPMENT DAMAGE

New Hampshire equipment rarely fails in one storm. It wears down while it waits. Six exposures cause the damage.

01
COILS
DIRT AND GRIT

Road grit, sawdust and yard dust pack into coils and fans and scratch finishes.

02
FANS AND BEARINGS
DEBRIS

Branches, gravel and storm trash dent fins and tear loose covers.

03
CONTROLS AND ELECTRONICS
MOISTURE AND ROAD SALT

Snowmelt, rain, condensation and salt spray corrode controls, bearings and electronics.

Unprotected industrial HVAC equipment exposed to road salt, moisture, dirt and debris in N
04
FINISH AND LABELS
UV

Sunlight breaks down plastics, rubber and labels over months outdoors.

05
NESTING AND WIRING
RODENTS AND BIRDS

Warm, sheltered units attract nesting animals that chew wiring and foul fans.

06
THE RESULT
EQUIPMENT DAMAGE

Clogged coils, seized fans, failed controls, worn bearings and shorted electronics.

LOOSE OR TORN TARP VS DRUM-TIGHT SHRINK WRAP

A loose tarp does not stop these risks. Wind lifts it, snow and water pool in it and corners tear. A fitted wrap closes those gaps.

FIT

TARP

Drapes and flaps in wind.

WRAP

Heat-shrunk to the shape of the unit.

SEAMS

TARP

Gaps, ties and open corners.

WRAP

Heat-sealed, with sealed access doors.

MOISTURE

TARP

Water pools and seeps in.

WRAP

Sealed shell sheds snow, rain and meltwater.

PESTS

TARP

Open gaps let rodents and birds in.

WRAP

Sealed coverage blocks most entry points.

OVER TIME

TARP

Sags, tears and gets retied.

WRAP

Stays tight with planned checks.

FREIGHT SHRINK WRAPPING IN NEW HAMPSHIRE

PROTECTING EQUIPMENT THROUGH ITS WHOLE JOURNEY

01
MANUFACTURE

Finished units wait at factory staging. We can wrap before the unit leaves the plant.

02
PROTECT

Bare units pick up dust, scratches and salt. Crews wrap and seal doors and plan ventilation.

03
TRANSPORT

Freight transportation exposes units to road spray, road salt and wind. The cover rides with the load.

04
STAGE

Laydown yards, a plant relocation or a winter layup can hold units outside for weeks.

05
INSTALL

The wrap comes off cleanly when the unit is ready to set, leaving it clean and dry.

LONG-TERM EQUIPMENT STORAGE IN NEW HAMPSHIRE

Months of outdoor storage need a sealed cover with planned ventilation and scheduled checks for snow load, wind and thaw.

OVER-THE-ROAD TRANSPORT PROTECTION

Winter highway moves need a cover that stays tight against road spray, road salt and wind, with sealed access points.

OEM EQUIPMENT PROTECTION IN NEW HAMPSHIRE

Manufacturers can wrap before shipping. Learn about factory-stage wrapping for OEMs, freight and transit protection and cooling tower protection.

CITIES WE SERVE IN NEW HAMPSHIRE

Industrial shrink wrap in Manchester, Nashua and Concord

EQUIPMENT SHRINK WRAPPING IN MANCHESTER, NH

Industrial shrink wrap in Manchester, NH supports defense and electronics manufacturing, where machinery, tooling and production lines wait in yards through snow.

INDUSTRIAL SHRINK WRAP IN NASHUA, NH

Nashua manufacturing keeps machinery, conveyors and tooling covered during storage and relocation.

INDUSTRIAL SHRINK WRAP IN CONCORD, NH

Concord construction and plant sites stage HVAC units and chillers outdoors.

INDUSTRIAL SHRINK WRAP IN PORTSMOUTH, NH

Seacoast shipyard components and port freight stay covered against salt spray.

INDUSTRIAL SHRINK WRAP IN LACONIA, NH

Lakes Region construction and plant equipment stays covered through snow and thaw.

SEACOAST SHIPYARDS AND PORTS

Marine engines and shipyard components wrapped for storage and winter staging.

We also serve nearby towns, including Dover, Salem, Derry, Keene, Rochester and Merrimack. See all Shrink Mobile service areas.

NEW HAMPSHIRE ILLUSTRATIVE APPLICATIONS

Marine equipment shrink wrap in New Hampshire

Manufacturing production line and industrial tooling protected with white shrink wrap duri

PRODUCTION LINE AND TOOLING PROTECTION, NASHUA, NH

PROBLEM

Production-line machinery and tooling waited in a plant yard during a relocation. Nor'easter wind, snow and road salt put finishes, fittings and controls at risk before the equipment was set.

SOLUTION

Shrink Mobile crews wrapped each piece on site with sealed seams & planned ventilation, marked inspection access points & follow-up seam checks arranged as a separate visit.

RESULT

Equipment stays dry and free of salt through the wait

Setup starts without cleanup or rework

Wrap comes off piece by piece as equipment reaches the floor

Marine engines and shipyard components protected with industrial shrink wrap during winter

SHIPYARD COMPONENT PROTECTION FOR WINTER STAGING, PORTSMOUTH, NH

PROBLEM

Marine engines and shipyard components waited in an outdoor yard through winter before installation. Salt spray, snow and wind threatened bearings, fittings and electronics.

SOLUTION

Crews wrapped each component in sealed film with planned ventilation and marked access points, scoped around yard access and weather.

RESULT

Components stay clean and dry through winter

Inspections use access points without removing the cover

No rework is needed before installation

PROOF

PHOTO GALLERY

HEAVY MACHINERY SHRINK WRAP IN NEW HAMPSHIRE

NEW HAMPSHIRE INDUSTRIAL SHRINK WRAP FAQS

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
Manufacturing machinery, industrial generators and HVAC equipment protected with white shr
INDUSTRIAL SHRINK WRAP IN NEW HAMPSHIRE

REQUEST AN INDUSTRIAL SHRINK WRAP PROPOSAL IN NEW HAMPSHIRE

Tell us what needs wrapping and where it sits. We reply with a proposal within 24 hours.

bottom of page